I started this Peachick Eyes Cardigan for Anna last spring. It was pretty much done by September but I didn’t have any buttons that I really liked for it so it was never really finished until just now and sat in her closet for the longest time. One of my friends (Kuschel und Kram) who makes and sells her own Waldorf dolls and stuffed animals here in Germany had made a pile of these buttons in rainbow colors and sent me some in the mail when I had admired them on her webpage. They ended up being the perfect fit for Anna’s cardigan and now it is finally done and being worn after almost a year of sitting in her closet! This knit was not hard but the lace “peacock eye” motifs need a little attention when you are following the chart. The length is perfect for my tall girl and this is a light weight sweater, knit with Drops Baby Alpaca Silk yarn, which is very soft and should be good as a spring or early fall piece for her to wear. I only used about 4 or 5 balls of yarn on this project and since I bought the yarn on sale during the Drops Alpaca party, where all of their alpaca yarns are 50% off, it was rather inexpensive to make. All in all this is a very lovely design for kids and has inspired me to make my own Peacock Eyes Cardigan!
I started knitting this vest for my grandfather, originally for his birthday in March, but wasn’t able to finish it in time so it will now become his Easter gift.
It was rather simple to knit on two straight needles, back and forth and was mostly all in stockinette stitch (one row of knit and one row of purl) with the exception of a bit of increasing/decreasing for the arm holes and the v-neck.
I knit a size small and ended up using about 7 1/2 balls of an aran weight wool/alpaca blend yarn by Drops called Nepal.
I used a free pattern from the American Red Cross called:
Man’s V-Neck Sweater (Sleeveless)
This is a World War II era knitting pattern which was used to supply soldiers and refugees with warm clothing as part of a “knit your bit” home knitting campaign during that time.
My grandfather served in WWII and maybe back then he also had a vest just like this one!
I knit this hat with a skein of yarn that I had gotten for free from Cephalopod Yarns in return for donating a hand-made item, that I had knit about a year ago, to the relief project called Afghans for Afghans. Afghans for Afghans is in the organization’s own words “a humanitarian and educational people-to-people project that sends hand-knit and crocheted blankets and sweaters, vests, hats, mittens, and socks to the beleaguered people of Afghanistan”. This is a grassroots effort dedicated to clothing people in need of warm clothes during times of war and crisis. It was inspired by the Red Cross tradition of knitting hand-made items for soldiers and refugees during World Wars I & II.
It’s really nice to donate a hand-made item and know that all of your effort and money/time is going to the aid of people in need.
Afghans for Afghans will be accepting donations of hand-knit hats, mittens and scarfs through the end of February if you are interested in donating to this cause.
Last year I knit this hat and donated it and it seemed fitting to knit another hat with the yarn I got for participating in the project.
Since my family has been experiencing an especially tough winter this year in upstate New York, with lots of snow and subzero temperatures, I decided to send this hat to my mom as a belated birthday gift. It has a loose fit, which I know she prefers, and knitted with double strands of yarn it is warm and cozy. You can knit this with just one strand of Merino yarn if you like but the addition of a fluffy mohair yarn makes this hat softer and fuzzier which makes for a better buffer against the cold weather.
Ear Flap Hat
Adult sizes S/M and M/L
You will need:
- 4.5 mm* double pointed and/or circular needles (circular needles are optional)
- Size J Crochet hook
- 1 skein (280 yds/256 m) DK/ light worsted weight merino yarn like: Cephalopod Yarn’s Traveller
- 1 skein (220 yds/200 m) worsted weight 10 ply mohair yarn like: Lana Grossa’s Babykid
Guage: 16 stitches and 25 rows = 4in x 4in in stockinette
*Or size needed to obtain guage!
What to do:
Size S/M follow instructions below
Size M/L follow instructions below including those in [ ]
For the Ear flaps:
Cast on 3 stitches on circular or double pointed needles.
Row 1: Knit
Row 2: Purl
Row 3: Knit 1, Increase one to the left, knit 1, increase one to the right, knit 1
Row 4: Purl
Row 5: Knit 1, Increase one to the left, knit 3, increase one to the right, knit 1
Rows 6, 8, 10, [12, 14]: Purl
Rows 7, 9, 11, [13, 15]: Continue to increase as before with one left and one right increase
(total of 13  stitches)
Row 12 : Purl
Rows 13 : Knit
Rows 14-23 [18-25]: Repeat the two rows above
Row 24 : Purl
Cut the yarn leaving a tail to weave in later and transfer flap from your needles to a long piece of waste yarn
On circular (or double pointed needles) cast on 13  stitches.
Place the earflap with the knit side facing you and knit across.
Cast on 28  stitches.
With the second earflap’s knit side facing you, knit across.
Cast on 13  more stitches. (Total of 80  stitches)
Join in the round and continue knitting for 35  more rows: about 5 1/2  inches from cast on rim of hat.
Row 1: *Knit 6 , Knit two together, repeat from * around
Row 2: *Knit 5 , Knit two together, repeat from * around
Continue in this manner for 4 more rounds. (total of 20 stitches)
Row 7 : Knit around
Row 8 : Knit two together, around (total of 10 stitches)
Row 9 : Knit around
Row 10 : Knit two together around (total of 5 stitches)
Cut a long tail. Pull yarn through remaining 5 stitches and to the inside of the hat. With a crochet hook single crochet all around the bottom edge of the hat. Weave in all loose ends. Use the crochet hook to pull loops of yarn through the bottom end of each ear flap that are 5 inches long. Tie the loops in place near the bottom of the ear flap and cut the ends of each loop to form a tassel. If you have enough yarn left over and you are so inclined you can also make a pom pom for the top of the hat. I used up exactly one skein of the merino yarn to make this. Block the hat carefully with a damp cloth and a hot iron. You can also line the hat by sewing in a layer of fleece to the inside to make it extra warm.
These were a gift for my husband’s sister for her birthday. They are meant to be worn just peeking out over the top of your boots.
For these boot liners I used Pam Power’s Birmingham Short Boot Liners pattern.
Drops yarns are really lovely to knit with and their online site Drops Design has tons of free patterns to choose from for all skill levels.
I only deviated a bit from her instructions by shortening the rib on the bottom to only 10 rows and adding lace.
I used wooden buttons and antique lace that I purchased at a discount store for about €3
and I have plenty of leftovers to use on my next project.
I’ve been really busy the past few weeks knitting up a storm for Christmas. We had snow last week but it all melted this past weekend and sadly it’s been cold and rainy around here lately. Whether it’s rain or snow though these holiday knits should keep you warm on a cold winters day and with the 70 % Wool, 30% Alpaca blend yarn they are really soft too! The scarf/cowl is the adult version of Anna’s Scarf which I made longer by knitting to 52cm, the hat is an adult version of the Baby Garter-Stitch Knit Hat that I made and the mittens I adapted partly from this Drops Design pattern. I’ve written up my patterns for the hat and mittens here. I was able to knit all these up last weekend while I was stuck at home with a pretty bad head cold, which I am hoping will be completely gone by the holidays and our trip back to the US to visit my family at the end of next week! These can easily be completed in the last few days we have before Christmas, using only 4 balls of chunky yarn which knits up very quickly, and you’ll still have time left over to make some Christmas cookies if you want too!
(Adult) Garter Stitch Hat
You will need:
2 Balls Lana Grossa: Linea Pura Fauna (or similar bulky weight Wool/Alpaca yarn blend)
Set of 5mm circular or double pointed needles
Set of 6mm circular and double pointed needles
Gauge: On 6mm needles in garter stitch, 8 stitches and 14 rows = 5cm x 5cm
Cast on 60 stitches evenly on a set of 5mm circular or double pointed needles, join and knit in the round as follows:
(The addition of a marking thread to tell where your round begins/ends is helpful!)
Rows 1-6: Knit 1, Purl 1 around
Now on size 6mm circular (or double pointed needles):
Row 7: Knit 6, make one stitch, around (total of 70 stitches)
Row 8: Purl around
Row 9: Knit around
Rows 10 and up: Repeat rows 8 and 9 until the hat measures at least 15cm. (16cm or more will make for a slightly longer hat. Mine came down just to the bottom of my ears.)
Ending on a purl row proceed to decrease as follows, switching to double pointed needles when needed:
Row 1: Knit 5, knit two together, around (total 60 stitches)
Row 2: Purl around
Row 3: Knit 4, knit 2 together, around (total 50 stitches)
Row 4: Purl around
Row 5: Knit 3, knit 2 together, around (total 40 stitches)
Row 6: Purl around
Row 7: Knit 2, knit 2 together, around (total 30 stitches)
Row 8: Purl around
Row 9: Knit 1, knit 2 together, around (total 20 stitches)
Row 10: Purl around
Row 11: Knit 2 together, around (total 10 stitches)
Row 12: Purl around
Row 13: Knit 2 together, around (total 5 stitches)
Cut the thread leaving a tail and thread the tail through the remaining stitches. Pull tight so there is no gap and weave the ends in. Sew a button of similar color on the top of the hat with the same yarn and a tapestry needle (optional).
Mittens in Stockinette Stitch
Adapted from Drops Design
You will need:
2 Balls Lana Grossa: Linea Pura Fauna (or similar bulky weight Wool/Alpaca yarn blend)
Set of 5mm double pointed needles
Set of 6mm double pointed needles
Gauge: On 6mm needles in stockinette stitch, 7 stitches and 9 rows = 5cm x 5cm
For the rib:
Cast on 24 stitches with a set of 5mm double pointed needles and knit in the round as follows:
Knit 3, Purl 3, around until the rib measures 8cm
Change now to size 6mm double pointed needles for the rest.
For the body of the mitten:
Knit 5 rounds
Increase for the thumb (place a marking thread before and after each increased stitch):
Row 1: Make one stitch, Knit 1, Make one stitch, Knit around (3 thumb stitches and 26 stitches total)
Row 2: Knit around
Row 3: Make one, Knit 3, Make one, Knit around (5 thumb stitches and 28 stitches total)
Row 4: Knit around
Row 5: Make one, Knit 5, Make one, Knit around (7 thumb stitches and 30 stitches total)
Row 6: Knit around
Row 7: Make one, Knit 7, Make one, Knit around (9 thumb stitches and 32 stitches total)
Row 8: Knit around
Height should now be 14cm from the bottom of the mitten. If not knit until a length of at least 14cm is reached and then:
Put the 9 thumb stitches on a long thread and cast on 3 new stitches behind these thumb stitches.(Now a total of 26 stitches on the needles)
Make sure your stitches are evenly spaced on at least 3 needles. (I reduced from having stitches on 4 to 3 needles here but you can keep all 4 if you want.)
Knit in the round until piece measures 24cm or at least comes up over the top of your pinkie finger.
Decrease as follows:
Row 1: Knit two together, knit 11, knit 2 together, knit 11 (total of 24 stitches)
Row2: Knit two together, knit 4, repeat around (total of 20 stitches)
Row 3: Knit two together, knit 3, repeat around (total of 16 stitches)
Row 4: Knit two together, knit 2, repeat around (total of 12 stitches)
Row 5: Knit two together, around (total of 6 stitches)
Cut the yarn leaving a tail and pull through the remaining stitches. Pull tight and weave the end in on the inside of the mitten.
For the thumb:
Pick up 4 stitches with a new strand of yarn and a crochet hook evenly spaced behind the thumb and preferably over two legs of a former stitch so you won’t make a hole in the mitten here. (total of 13 stitches)
Place a marking thread at the beginning of the round and knit in the round on 6mm double pointed needles until the thumb measures 6cm from the shortest side.
Row 1: Knit 2 together around (total of 7 stitches)
Row 2: Knit 2 together around (total of 4 stitches)
Cut yarn and pull through remaining 4 stitches. Weave in the loose ends.
We got our first snow here this weekend and Anna was super excited, even though it was only a dusting. I was secretly excited too as I love snow and we don’t see much of it here in North-western Germany. I miss the snowy, white winters we used to have when I was still living in upstate New York. I quickly knit up this scarf/cowl for Anna with some bits of yarn I had left over from making this hat for myself last winter and it came out very soft, comfy and warm. I connected it at the ends to make a tube so I wouldn’t have to worry about it falling off. It’s quite stretchy since it’s knitted in garter stitch and this is probably one of the easiest and quickest things I’ve ever knit and a good way to use up any of your yarn left overs.
You will need:
Size 13 (9 mm) straight knitting needles
Less than 1 skein of Lana Grossa’s Linea Pura Fauna (Super Bulky Yarn: 70% Wool and 30% Alpaca) or other chunky yarn
Crochet hook for weaving in the ends and connecting the scarf
Gauge: On size 13 (9mm) needles in garter stitch, 6 stitches and 11 rows = 5cm x 5cm
Cast on 15 stitches.
Knit each row until the scarf measures about 42-44cm.
Bind off leaving a long tail so that you can weave the ends together.
Use the long tail of yarn and a crochet hook to sew the two ends together.
Weave in any loose ends.
I knit these garter-stitch boots for a friend of mine who was having a baby last month and I was looking around for a hat to match them. I saw this really cute garter-stitch knit hat with a button on top at Gap.com and thought it would go perfectly with the boots I had just made. I did not, however, want to pay $16.95 for the hat plus shipping and handling on top of that and since I currently live in Germany the cost for shipping would have come to almost the same price as the hat! So I used the handy zoom feature on the product page and scrutinized the hat a little closer and thought, I can make this myself! From the picture I was able to do a bit of row counting and stitch calculating and it wasn’t too hard to come up with this pattern for the mock “Gap garter-stitch knit hat”. I used the same yarn as for the boots and I think the pair would make a very nice gift for a new baby or mom to be. This hat is a cinch to make. I was a little nervous about making the boots when I first started, as I’ve never made any before, but they knit up extremely quickly and were no trouble to make at all. Yarn choice is key when making baby garments and I wanted something that was soft, organic and neutral in color since I didn’t know the sex of the baby yet. I had quite a bit of this extremely soft, organic, hand-spun lamb’s wool in my stash, left over from some Christmas projects that I made last year, so I decided to use that. I used a button that came as an extra button from some clothing that I had bought for my daughter Anna, that was sitting in my stash of buttons, and it made a great accent to the hat. Altogether the hat and boots cost me nothing to make, just a little bit of my time.
Garter-Stitch Knit Hat
Inspired by the Baby Gap garter-stitch knit hat
4 and 5 mm (40 cm long) circular needles (or set of double pointed needles)
5 mm double pointed needles
1 skein of 100% Organic Lambs Wool or Organic Cotton Yarn (worsted weight)
1 button a similar color as the yarn
Tapestry needle and/or crochet hook (for weaving in the ends)
Gauge: On 5mm needles in garter stitch, 10 stitches and 18 rows = 5cm x 5cm
Cast on 80 stitches using 4 mm circular or double pointed needles (if using double pointed needles divide so that there are 20 stitches on each of 4 needles)
Row 1: Knit 1, Purl 1 around and place a marking thread at the end of the round
Rows 2-5: Repeat row 1
Row 6: With size 5 mm circular or double pointed needles knit 6, knit 2 together, repeat around. (Total of 70 stitches)
Row 7: Purl around
Row 8: Knit around
Row 9: Purl around
Rows 10- 35: Repeat rows 8 and 9 (ending on a purl row)*
Row 36: Knit 5, knit 2 together, repeat around (Total of 60 stitches)
Row 37: Purl around
Row 38: Knit 4, knit 2 together, repeat around (Total of 50 stitches)
Row 39: Purl around
Row 40: Knit 3, knit 2 together, repeat around (total of 40 stitches)
Row 41: Purl around
Row 42: Knit 2, knit 2 together, repeat around (total of 30 stitches)
Row 43: Purl around
Row 44: Knit 1, knit 2 together, repeat around (total of 20 stitches)
Row 45: Purl around
Row 46: Knit 2 together around (total of 10 stitches)
Row 47: Purl around
Row 48: Knit 2 together around (total of 5 stitches)
Cut the thread leaving a tail and thread the tail through the remaining stitches. Pull tight so there is no gap and weave the ends in. Sew a button of similar color on the top of the hat with the same yarn and a tapestry needle.
*Repeat rows 8 and 9 until the hat measures 9 cm or about 3 1/2 inches, that was row 35 for me, but make sure to end on a purl row before starting to decrease.